Stan Pinguin Interval 6 Airtube

Product detailed description

A spacious, inflatable tent with variable entrances and a spacious vestibule with enough room for 6 people. The use of Airtube technology means it is very easy and fast to erect. The flysheet is made of Polyester with a polyurethane coating, guaranteeing a water column of 4,000 mm. The seams have waterproof tape. The groundsheet is made of Nylon with a Polyurethane coating giving a water column of 10,000 mm. Instead of poles, there are TPU inflatable tubes inserted into sleeves made of Polyethylene and Polyester fabric inside the flysheet. Pump included. Description Double skin tent - consists of an inner and an outer tent - flysheet. The inner tent has a rectangular floor plan with one entrance on its longer side. The flysheet has a spacious vestibule with two entrances (front and side).

Tent concept

This is based on the principle of using TPU inflatable tubes inserted into sleeves made of Polyethylene and Polyester fabric inside the flysheet. The flysheet and inner tent (which is suspended from the inside of the flysheet) are erected together after inflating the tubes. The advantage of this construction is the option of detaching the inner tent from the flysheet, which is free-standing and creating a single-skin tent with an integrated polyethylene groundsheet without an inner tent.

Ventilation

There are 2 covered vents in the upper corners of the vestibule and one large vent at the back of the tent. The covered vents are designed not to close by themselves. In hot weather, it is recommended you also open the 2 front triangular mesh windows and side mesh window for maximum ventilation.

Pitching the tent

Spread the flysheet out on the ground and anchor it with pegs in the corners of the tent. Then open the screw cap on the third (lowest) tube located at the back of the tent, insert the air hose into the valve and pump until you hear the whistle located on the pump hose. Then remove the hose and screw back the cap. Do the same for the middle tube and finally the front tube. Use the plastic toggles to suspend the inner tent from the rings on the flysheet inside the tent. After suspending the inner tent, close all entrances and windows. Then pull the flysheet taut by tightening the straps at the corners. Then anchor all the flysheet straps to the ground with pegs and tighten the guy ropes.